Panasonic DMCFZ40K, VQT2Y96 Inserting and Removing the Card optional/the Battery

Preparation

Inserting and Removing the Card (optional)/the Battery

•Turn the power switch to [OFF] and confirm that the lens barrel is retracted.

•Close the flash.

•We recommend using a Panasonic card.

Slide the release lever in the direction of the arrow and open the card/battery door.

•Always use genuine Panasonic batteries.

•If you use other batteries, we cannot guarantee the quality of this product.

OPEN LOCK

Battery: Insert until it is locked by the lever A being careful about the direction you insert it. Pull the lever A in the direction of the arrow to remove the battery.

Card: Push it fully until it clicks being careful about the direction you insert it. To remove the card, push the card until it clicks, then pull the card out upright.

B: Do not touch the connection terminals of the card.

•The card may be damaged if it is not fully inserted.

1:Close the card/battery door.

2:Slide the release lever in the direction of the arrow.

•If the card/battery door cannot be completely closed, remove the card, check its direction and then insert it again.

B

OPEN LOCK

- 20 -