Connecting to other equipment

Saving the recorded still pictures and motion pictures

Methods to export still pictures and motion pictures to other devices will vary depending on the file format. (JPEG, RAW, AVCHD Lite, or Motion JPEG). Here are a few suggestions.

Copy the playback image using an AV cable

File formats that can be used: [AVCHD Lite], [Motion JPEG]

Copy images played back with this unit to DVD disc, hard disk, or video using a DVD recorder, or video.

This can be played back with equipment that is not compatible with high definition (AVCHD), so it is convenient for distributing copies. Image will be standard quality instead of high definition at this time.

AV OUT/DIGITAL

1Yellow: to the video input socket

2 White: to the audio input socket

3 Red: to the audio input socket A AV cable (supplied)

1Connect this unit with the recording equipment with an AV cable (supplied).

2Start the playback of this unit.

3Start the recording on the recording equipment.

When ending the recording (copying), stop the playback on this unit after stopping the recording on recording equipment.

Note

When you play back motion pictures on 4:3 aspect ratio TV, you must set [TV ASPECT] (P36) on this unit to [4:3] before starting a copy. The image will be vertically long if you play back motion pictures copied with [16:9] setting on a [4:3] aspect TV.

Do not use any other AV cables except the supplied one.

It is recommended to turn off the display of the screen by pressing the [DISPLAY] on the camera while copying. (P62)

See the instruction manual for the recording equipment about the details of copying and playing back.

- 178 -

Page 178
Image 178
Panasonic DMCFZ40K Saving the recorded still pictures and motion pictures, 178, Copy the playback image using an AV cable