Panasonic DMCFZ40K, VQT2Y96 operating instructions 168, Protect, When Multi has been selected

Advanced (Playback)

[PROTECT]

You can set protection for pictures you do not want to be deleted by mistake.

Select [PROTECT] on the [PLAYBACK] Mode menu. (P27)

Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/SET].

[SINGLE][MULTI]

Select the picture, and then press [MENU/SET] to set.

When [MULTI] has been selected

•Repeat these steps for each picture.

•The settings are canceled when [MENU/SET] is pressed again.

Press 2/1 to select	Press 3/4/2/1 to
the picture.	select the pictures.

Press [‚] to return to the menu screen.

•Press [MENU/SET] to close the menu.

∫Canceling all the [PROTECT] settings

1Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].

2Press 3 to select [YES] and then press [MENU/SET].

3Press [MENU/SET] to close the menu.

•If you press [MENU/SET] while canceling protection, the canceling will stop halfway.

Note

•The protect setting may not be effective on other equipment.

•Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in memory or the card is formatted.

•Even if you do not protect pictures on a card, they cannot be deleted when the card’s Write-Protect switch is set to [LOCK].

- 168 -