Regarding 24p output [BD-V]
Many
These can be output in 24p as the original. Therefore,
NECESSARY CONNECTIONS
≥Connect to a TV supporting 1080/24p input via an HDMI cable.
NECESSARY SETTINGS
≥“24p Output”: “On” (> 32)
Getting started
Necessary settings
After connecting to the terminals, perform necessary settings.
1) | While stopped | |
Secondary Audio” |
| Press [SETUP]. |
| 2) | Press [3, 4] to select “Audio” and press [OK]. |
“Dolby D/Dolby D +/ | 3) | Press [3, 4] to select “Digital Audio Output” and press [OK]. |
Dolby TrueHD” | 4) | Press [3, 4] to select “Dolby D/Dolby D +/Dolby TrueHD”, |
|
| or |
Audio
Dynamic Range Compression | Off |
Digital Audio Output |
|
PCM Down Conversion | Off |
Downmix | Stereo |
OK |
|
RETURN |
|
“Analog Audio Output” [BD55]
1)While stopped Press [SETUP].
2)Press [3, 4] to select “TV / Device Connection” and press [OK].
3)Press [3, 4] to select “Analog Audio Output” and press [OK].
4)Press [3, 4] to select the option and press [OK].
5)Press [OK].
≥The channel setting screen is displayed. (> 34)
Connection |
|
TV Aspect | 16:9 |
HDMI Connection |
|
Component Video Resolution | 480i |
Analog Audio Output | 2ch + 5.1ch |
OK |
|
RETURN |
|
≥For more information about settings, refer to page 31, 32, 34.
≥When using the different terminal at the same time, the sound may not be output with the desired audio if the setting is incorrect. In the following case, set “HDMI Audio Output” to “Off”. (> 32)
–When connecting a compatible amplifier/receiver using 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals, and connecting a compatible television using HDMI AV OUT terminal
–When connecting a compatible amplifier/receiver using both 7.1ch AUDIO OUT/5.1ch AUDIO OUT terminals and HDMI AV OUT terminal if outputting the audio from analog terminals
–When connecting a compatible amplifier/receiver using DIGITAL AUDIO OUT terminals, and connecting a compatible television using HDMI AV OUT terminal
To return to the previous screen
Press [RETURN].
To exit the screen
Press [SETUP].
9
RQT9243 or RQT9350
