To select these options, perform steps 1–4 (> 32)
“Network”
IP Address/DNS Settings (> 17)
≥Press [OK] to show the following settings.
| Connection Test | — — — — |
| |
| IP Address Auto Configuration (DHCP) | ≥On | ≥Off |
|
| IP Address | — — | ||
|
|
| ||
| Subnet Mask | — — | ||
|
|
| ||
| Default Gateway | — — | ||
| DNS Auto Configuration (DHCP) | ≥On | ≥Off |
|
|
|
| ||
| Primary DNS | — — | ||
|
|
| ||
| Secondary DNS | — — | ||
| Auto Detect Connection Speed | ≥On | ≥Off |
|
|
|
|
| |
| Connection Speed Setting | ≥10BASE Half Duplex | ≥10BASE Full Duplex | |
| This is enabled only when “Auto Detect Connection Speed” is | ≥100BASE Half Duplex | ≥100BASE Full Duplex | |
| turned “Off”. |
|
|
|
|
|
|
| |
Proxy Server Settings (> 18) |
|
|
| |
≥Press [OK] to show the following settings. |
|
|
| |
|
|
|
|
|
| Reset to factory preset | ≥Yes | ≥No |
|
|
|
|
| |
| Proxy Address | (The initial setting is blank.) |
| |
| Proxy Port Number | (The initial setting is “0”.) |
| |
| Connection Test | — — — — |
| |
|
|
|
| |
Network Service (> 27) (VIERA CAST) |
|
|
| |
≥Press [OK] to show the following settings. |
|
|
| |
|
|
|
|
|
| Network Lock | ≥On | ≥Off |
|
| You can restrict using VIERA CAST. | Changing settings (When “On” is selected) | ||
| ≥Follow the | ≥Change Password |
| |
| the numbered buttons when the password screen is shown. It |
|
|
|
| will be the common password for |
|
|
|
|
|
|
| |
| ≥Do not forget your password. |
|
|
|
| Audio Auto Gain Control | ≥On | ≥Off |
|
| Volume that is different depending on the contents is adjusted |
|
|
|
| automatically to the standard volume while using the VIERA |
|
|
|
| CAST. |
|
|
|
| ≥Depending on contents, this function effect will not work. |
|
|
|
| ≥Select “Off” when the audio is warped. |
|
|
|
|
|
|
|
|
| Reduce to Screen Size | ≥On | ≥Off |
|
| The screen is displayed reduced so the displayed screen of the |
|
|
|
| content does not get truncated. |
|
|
|
|
|
|
| |
| Time Zone | ≥GMT s12 to r12 |
| |
| By selecting the time zone, it is possible to set the unit’s time to | (The initial setting is “s5”.) |
| |
| match your location. | GMT s5 l EST (Eastern Standard Time), GMT s6 l CST (Central Standard Time) | ||
| ≥Some VIERA CAST contents require the time zone to be set. | GMT s7 l MST (Mountain Standard Time), GMT s8 l PST (Pacific Standard Time) | ||
| Set the time zone if necessary. | GMT s9 l AKST (Alaska Standard Time), GMT s10 l HST (Hawaii Standard Time) | ||
| DST | ≥On | ≥Off |
|
| Select “On” when using Daylight Saving time. |
|
|
|
MAC Address (> 17)
Displays the “MAC Address” of this unit.
Settings
“Others”
Off Timer | ≥2 Hours |
| ≥6 Hours | ≥Off | |
Select how long the unit remains on when it is not being used. |
|
|
|
| |
|
|
|
| ||
Remote Control Code (> 36) | ≥Set Code 1 | ≥Set Code 2 | ≥Set Code 3 | ||
Quick Start | ≥On: |
|
|
| |
Speed of startup from power off is increased. | ≥Off: |
|
|
| |
≥When the setting of | Internal control unit will be powered when it is set to "On”, so contents of the | ||||
following will be different from the time it is set to “Off”. | |||||
the TV that supports HDAVI Control 4, it will take longer to | |||||
≥Idle power consumption will increase. (about the power consumption > 45) | |||||
startup this unit when the power supply of the TV is on | ≥The cooling fan may turn slowly to prevent overheating of internal parts. | ||||
standby mode even if the “Quick Start” is set to “On”. | |||||
|
|
|
| ||
|
|
|
|
| |
Easy Setting | ≥Yes | ≥No |
|
| |
You can execute basic settings |
|
|
|
| |
Aspect”, “Analog Audio Output” [BD80], “Quick Start”). |
|
|
|
| |
|
|
|
|
| |
|
|
|
| (Continued on the next page) | |
35
RQT9378
