Panasonic DMP-BD80, DMP-BD605 warranty AC power connection, Audio

G Connecting to 5.1ch AUDIO OUT terminal [BD80]			≥“Analog Audio Output” should be set to “2ch
			(Downmix) + 5.1ch”. (> 34)
		Multi channel speakers	≥Enjoying High Bit rate Audio of BD-Video
			(> 8)
			≥Using this connection, 7.1 channel surround
			is mixed down to 5.1 channel audio.
			≥When connecting amplifier/receiver or other
			devices with HDMI AV OUT terminal, set
			“HDMI Audio Output” to “Off”. (> 34)
		Connect Audio	(Otherwise, depending on the specifications
			of connected devices, the audio from AUDIO
		cables to
		terminals	OUT terminal may be output as two channels
		corresponding to	only.)
		the speakers you	≥When connecting a TV (> 11, A) with HDMI
		have connected.	AV OUT terminal, set “HDMI Audio Output” to
	
			“Off”. (> 34)
			(Otherwise, the sound may not be output with
			the desired audio.)
Back of the unit			≥Depending on how the disc was recorded, the
			audio may not be output properly on the
			number of channels desired.
		Amplifier/receiver	Cable connections
			a Front speaker (L/R)
			b Surround speaker (L/R)
			c Center speaker
			d Subwoofer
H Connecting to 2ch AUDIO OUT terminal			≥“Analog Audio Output” should be set to “2ch
			(Downmix) + 5.1ch”. (> 34)
	OR		≥Using the two analog audio channels this
			connection provides, you will not be able to
Television			use any surround sound audio modes.
	AUDIO IN
	R L VIDEO IN
		Amplifier/receiver
	AUDIO IN
	Audio/Video cable (included)
Back of the unit

2ch AUDIO OUT

AC power connection

Getting started

Cooling fan

Back of the unit

AC power supply cord (included)

To a household AC outlet (AC 120 V, 60 Hz)

≥For best results this unit should be connected directly to an AC outlet.

≥This unit consumes a small amount of AC power (“Quick Start”: “Off”, less than 0.5 W) even when turned off. In the interest of power conservation, if you will not be using this unit for an extended period of time, it can be disconnected.

13

RQT9378