Display

Status Messages

Choose whether to show status messages automatically.

On-screen Language

Choose the language for menus and on-screen messages.

Screen Saver Function

This is to prevent burn-in on the screen.

When this is set to “On”:

If there is no operation for 10 minutes or more, Direct Navigator screen switches to HOME menu automatically.

While playing and pausing, etc., this function is not available.

As for Music [CD-DA] or MP3, regardless of the setting, if there is no operation for a while, Direct Navigator screen switches to the other states automatically.

Front Panel Display

Changes the brightness of the unit’s display.

If “Auto” is selected the display is dimmed during playback and bright not during playback.

License

Information about the software used by this unit is displayed.

TV / Device Connection

3D Settings

Press [OK] to show the following settings:

3D Type

Select the format of the connected TV.

Change the settings for 3D on the TV also when “Checker board” or “Side by side” is selected.

3D Playback Precautions

Set to display or hide the 3D viewing warning screen when playing back the 3D compatible video software.

TV Aspect

Set to match the type of television connected.

When connected to a 4:3 aspect television and playing 16:9 ratio image:

 

The sides are cut off so

4:3 Pan &

the picture fills the screen.

 

 

 

 

 

 

 

 

 

 

 

 

When playing BD-Video,

 

 

 

 

 

 

 

 

 

 

 

 

Scan

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

video is output as “4:3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Letterbox”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4:3

Black bands appear at the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

top and bottom of the

 

 

 

 

 

 

 

 

 

 

 

 

 

Letterbox

 

 

 

 

 

 

 

 

 

 

 

 

 

picture.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When connected to a 16:9 widescreen television and playing 4:3 ratio image:

16:9

Video is displayed as a 4:3 ratio image in the

center of the screen.

 

16:9 Full

Video is displayed as a horizontally

stretched 16:9 image.

 

 

 

HDMI Connection

Press [OK] to show the following settings:

HDMI Resolution

The items supported by the connected devices are indicated on the screen as “¢”. When any item without “¢” is selected, the images may be distorted.

If “Auto” is selected, automatically selects the output resolution best suited to the connected television.

To enjoy high-definition video up-converted to 1080p, you need to connect the unit directly to 1080p compatible HDTV (High Definition Television). If this unit is connected to an HDTV through other equipment, it must also be 1080p compatible.

24p Output

When this unit is connected to a TV supporting 1080/24p output using an HDMI cable, movies and other material recorded at 24p are output at 24p.

When playing DVD-Video, set to “On” and then set “24p”

in “Video” (

28) to “On”.

Settings

≥ 24p :

 

≥ When BD-Video images other than 24p are played,

 

images are output at 60p.

 

A progressive image recorded at a rate of 24 frames per

 

second (motion-picture film). Many BD-Video movie

 

contents are recorded in 24 frames/second in

 

accordance with the film materials.

 

HDMI Color Mode

This setting is for selecting color-space conversion of the image signal when the unit is connected using an HDMI cable.

VQT3B58 31

Page 31
Image 31
Panasonic DMP-BDT210, DMP-BDT110 owner manual Display, TV / Device Connection