Reference
35
VQT3B58

This unit does not recognize the USB

connection correctly.

¾
If USB device is co nnected to this un it while playing a
disc or in a video com munication the co nnection will not
be recognized. Press [HOME] and reconnect USB
device.
¾
[BDT210] : USB memory and USB HD D are not
recognized via the rear USB port of this unit.
¾
Disconnect and reconnect the USB cable. If it still does
not recognize the conn ection, turn the power of this unit
off and on again.
¾
USB devices connected using a USB extension cable
other than the supplied with the Wireless LAN Adaptor
DY-WL10 (optional) [BDT110] or a USB hub may not be
recognized by this unit.
¾
If you connect USB HDD to th is uni t, u se U SB exte ns io n
cable that is supplied with the HDD.
¾
If two USB memory and USB HDD are connected
simultaneously, they will not be recognized by this unit.

The images from this unit do not appe ar on

the television.

Picture is distorted.

¾
An incorrect resolution is selected in “HDMI R esolution”.
Reset the setting as follows:
1While the unit is on, press and hold [OK], [B] and [Y ] on
the remote control at the same time for more than
5 seconds.
– “00 RET” is displayed on the un it’s display.
2Repeatedly press [1] (right) on the remote control or
[POWER Í/I] on the unit until “04 PRG” is displayed on
the unit’s display.
3Press and hold [OK] on the rem ot e control or [<OPEN/
CLOSE] on the un it for at least 3 sec onds.
Set the item again. (31)
– When Dolby Digital Plus, Dolby TrueHD, and DTS-HD
audio are not output in bitstre am , se le ct “Yes” in “Restore
Default Settings” and make proper settings. (33)
¾
When “3D BD-Video Playback” in the Setup menu is set
to “Automatic”, imag es may not be output depending on
the connection method. After removin g the disc from this
unit, select “Set before pl ay” in the Setup menu, and
select “2D Playback” in the setup screen displayed
when playing 3D discs. (29)
Video is not output. [BDT210]
¾
Set “High Clarity S ound” in the Playb ack menu to “Off”
to use the VIDEO OUT terminal. (28)

Video is not output in high-definition.

¾
Confirm that “HDMI Resolu tion” in the Setup menu is set
properly. (31)

3D video is not out put.

¾
Is there a non-3D compatible amplifi er/receiver
connected between this unit and a TV? (9)
¾
Are the settings on this uni t and the TV correct? (20)
¾
Is the amplifier/receiver that is connected between this
unit and TV on?

3D video is not output correctly as 2D.

¾
Select “Set before play” in the Setup menu, and select
“2D Playback” in the setup screen displayed when
playing 3D discs. (29)
¾
Discs that have recorded tit les with Side by side
(2 screen structure) and that can be enjoyed in 3D are
played back in accordan ce with the settings of the TV.

No subtitles.

¾
When progressive output is on, closed c aption s/su bti tles
cannot be displayed.

The subtitles overlap closed captions

recorded on discs.

¾
Turn off the subti tles or turn off the closed caption
setting on the TV. (27)

A black band is displayed around the edge

of the screen.

The aspect ratio of the screen is abnormal.

¾
Confirm the “TV Aspect” is set properly. (31)
¾
Adjust the aspect setting on the television.

Cannot switch audio.

¾
When connecting an amplifier/receiver using an
OPTICAL terminal o r an HDMI termina l, you cannot
switch the audio if “Digital Audio Output” is set to
“Bitstream”. Set “Digital Audio Output” to “PCM”. (30)

Cannot hear the desired audio type.

¾
Check the connect ions and the “Digita l Audio Output”
settings. (9, 30)
¾
To output audio from a device connecte d with an HDMI
cable, set “HDMI Audio Output” to “On” in the Setup
menu. (32)
Picture
Audio
DMP-BDT110_115_210_VQT3B58_eng.book 35 ページ ２０１０年１２月８日　水曜日　午後４時３９分