Panasonic DMP-BDT110, DMP-BDT210 owner manual Connecting to a TV, Hdmi cable, Audio/Video cable

STEP 1 : Connecting to a TV

≥Do not place the unit on amplifiers/receivers or equipment that may become hot. The heat can damage the unit.

≥Before making any connections we suggest you temporarily disconnect all the units from AC power.

≥Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly.

≥Please use High Speed HDMI Cables that have the HDMI logo (as shown on the back cover). It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use HDMI cables 5.0 meters (16.4 ft.) or less.

Recommended part number (High Speed HDMI Cable): RP-CDHS15 (1.5 m/4.9 ft.), RP-CDHS30 (3.0 m/9.8 ft.), RP-CDHS50 (5.0 m/16.4 ft.), etc.

[BDT110]

COMMUNICATION 10BASE-T/100BASE-TX

CAMERA

WIRELESS LAN
ADAPTOR	LAN	Back of the unit
	10BASE-T/100BASE-TX
COMMUNICATION
CAMERA	LAN

∫Via an HDMI AV OUT terminal (High quality)

–It is possible to play back 3D videos and 3D still pictures by connecting this unit with a 3D compatible TV.

HDMI IN

HDMI cable

E-T/100BASE-TX

LAN

≥Set “HDMI Audio Output” to “On” (> 32).

≥The HDMI connection supports VIERA Link “HDAVI Control” (> 26).

∫Via a VIDEO OUT terminal (Standard quality)

AUDIO IN

R L VIDEO IN

Audio/Video cable

10BASE-T/100BASE-TX

COMMUNICATION

CAMERALAN

≥Connect terminals of the same color.

8 VQT3B58