Accessories
Check the supplied accessories before using this unit.
1Remote control (N2QAYB000710)
2Batteries for remote control
1AC power supply cord (K2CB2CB00022)
[For_Canada]
The enclosed Canadian French label sheet corresponds to the English display on the unit.
≥Product numbers provided in this Owner’s Manual correct as of December 2011. These may be subject to change.
≥Do not use AC power supply cord with other equipment.
Unit and media care
∫Clean this unit with a soft, dry
cloth
≥Never use alcohol, paint thinner or benzine to clean this unit.
≥Before using chemically treated cloth, carefully read the instructions that came with the cloth.
∫This unit’s lens
The disc drive of this unit has sufficient dust resistance, so there is no need to clean the lens.
∫Clean discs
DO | DO NOT |
∫Using the remote control
Insert so the poles (i and j) match those in the remote control.
LR6, AA
(Alkaline batteries)
Point it at the remote control signal sensor on this unit. (> 7)
Wipe with a damp cloth and then wipe dry.
∫Disc and card handling
precautions
≥Handle discs by the edges to avoid inadvertent scratches or fingerprints on the disc.
≥Do not attach labels or stickers to discs.
≥Do not use disc cleaning sprays, benzine, thinner, static electricity prevention liquids or any other solvent.
≥Clean any dust, water, or foreign matter from the terminals on the rear side of the card.
≥Do not use the following discs:
–Discs with exposed adhesive from removed stickers or labels (rented discs, etc).
–Discs that are badly warped or cracked.
–Irregularly shaped discs, such as heart shapes.
∫To dispose or transfer this unit
The unit may keep the user settings information in the unit. If you discard this unit either by disposal or transfer, then follow the procedure to return all the settings to the factory presets to delete the user settings. (> 33, “To return all settings to the factory preset.”)
≥ The operation history may be recorded in the memory of this unit.
4 VQT3V22
