Panasonic DMR-E20 warranty Play, Remote control

Play

Play fails to start even when	³Insert the disc correctly with the label facing up. F
[1, PLAY] is pressed.	³This unit cannot play discs other than DVD-RAM, DVD-R, DVD-Video, Video CD, and CD. 6
Play starts but then stops	³The disc is dirty. Clean it. ³
immediately.	³The disc may be badly scratched. ³
“U11”, “NO DISC”, or “NO PLAY”	³You inserted a blank DVD-RAM or DVD-R.
appears on the unit’s display.	³Condensation has formed: Wait 1 to 2 hours for it to evaporate.
No response when buttons	³Some operations may be prohibited by the disc.
pressed.	³If the unit is not operating at all, press [ê/I, POWER] to switch the unit to standby, then press
	[ê/I, POWER] again to turn the unit on. The unit may not be operating correctly due to lightning,
	static electricity, or some other external factor.
A title or chapter doesn’t play	³Some titles and chapters on DVD-Video are not played when you have changed the ratings level.
when it is selected.	§
Picture distorted during search.	³Some distortion is normal.
There is ghosting.	³Change the settings for “3D NR”, “Block NR”, and “Mosquito NR” to “0” or turn MPEG DNR off
	with the on-screen menu icons. Z
Alternative soundtrack and	³The languages are not recorded on the disc.
subtitles cannot be selected.	³You may have to use the disc’s menus to select languages. G
No subtitles.	³Subtitles are not recorded on the disc.
	³Turn the subtitles on. Y
Angle cannot be changed.	³This function depends on software availability. Angles can only be changed during scenes where
	different angles are recorded (“	” appears on the display).
You have forgotten your ratings	³Return the ratings setting to “8”.
password.	While the disc tray is open, press and hold [:] and [9] on the main unit at the same time for
	5 or more seconds.
Displays
The display is dim.	³Go to Display in the ACTION menus and change the display’s brightness with “FL Display”. ¤
“12:00” is flashing on the unit’s	³The clock is not set.
display.	Go to Set Up in the ACTION menus and set the clock with “Clock Settings”. ¨

Remote control

The remote control doesn’t work.

Cannot operate the television.

³[DVD, TV] is not switched to “DVD”.

Switch to “DVD” when operating this unit. 8, <

³The remote control and main unit are using different codes. Change the code on the remote control or main unit. ¢, £ ³The batteries are depleted. Replace them with new ones. <

³Point the remote control at the remote control sensor on the main unit. < ³Remove obstacles from between the remote control and main unit.

³Change manufacturer code. Some televisions cannot be operated even if you change the code.

=

³[DVD, TV] is not switched to “TV”.

Switch to “TV” when operating the television. 8

Reference

101

RQT6035