Recording television programmes (continued)

ªTo check the remaining time and the current mode during recording

Press [STATUS] (28) several times.

One Touch Recording—Specify a time to stop recording

[RAM] [DVD-R]

(1)

 

 

 

 

 

 

DVD-RAM

0:07:21 6.8.

π Remain

0:50 XP

π PRG2 0:05.14 XP

 

 

 

 

REC

π PRG1 0:00.10 SP

 

 

 

PLAY

 

 

 

 

 

 

 

LR

(1)Available recording time and recording mode (e.g.: “0:50 XP” indicates 50 minutes in XP mode)

Main unit only

This is a simple way of making timer recordings when you are in a hurry or before you go to bed. You can set the time up to 4 hours in advance.

While recording

Press [¥, REC] (16) on the main unit to select the recording time.

Notes

The time increases as illustrated each time you press the button.

The message “Cannot record. Maximum number of

The counter decreases in 1-minute units after you set a time. You

programmes recorded.” is displayed if you try to start recording

can change the time again with the same operation.

when there are already 99 programmes on a disc. Erase

When the time you set is reached, recording stops and the unit

unneeded programmes (DVD-RAM/DVD-R) or use a new disc to

switches to standby.

continue recording.

Unit’s Display

Check that disc can be recorded on (page 8).

(Counter) # 30 # 60 # 90

 

For your reference

^ 240 ! 180 ! 120 !}

You can record up to 99 programmes on one disc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You cannot change the channel or recording mode during

 

 

 

 

 

 

 

recording. You can change them while recording is paused, but

 

 

 

 

 

(2)

 

 

 

 

 

 

the material is recorded as a separate programme.

 

 

 

 

 

 

 

(2) Shows recording will stop in 30 minutes

An error message appears if you try to start recording when a

 

 

 

 

 

 

 

disc is full; the remaining time will be shown as “0:00”. To

 

 

 

 

 

 

 

continue recording, erase unneeded programmes (DVD-RAM

ªTo cancel

only (page 34), Erasing programmes) or use another disc.

During recording, press [¥, REC] (16) until the counter appears.

There are limitations when recording to DVD-R (page 9).

Recording continues.

The message “Can not record on the disc.” is displayed when

 

 

 

 

 

 

 

recording was not completed correctly. Check the discs for dirt or

ªTo show the time remaining until recording finishes

scratches.

Press [STATUS] (28) several times.

Recording cannot be performed correctly if you try to record PAL

 

 

 

 

 

 

 

system to a disc that already contains recordings using NTSC.

 

 

 

 

 

DVD-RAM

 

 

 

 

REC/OTR 30

 

Flexible recording mode (FR)

ARD

[RAM] [DVD-R]

The unit calculates a recording rate that enables the recording to fit in the time you set (within the remaining time on the disc) and with the best possible picture quality.

1While stopped

Press [F Rec] (26).

FLEXIBLE RECORDING

Recording in FR mode

Maximum rec. time

1 Hour 23 Min.

Set rec. time

 

1 Hour 23 Min.

 

 

 

 

 

 

Start

 

 

Cancel

SELECT

 

 

ENTER

RETURN

LR

For your reference

This does not work during timer recordings or while using flexible recording.

You cannot use the remote control to specify a time for recording to stop.

Recording stops and the set time is cleared if you press [] (7). The set time is cleared if you change the recording mode or

channel while recording is paused.

2Press [3, 4, 2, 1] (10) to set the recording time.

3To start recording

Press [3, 4, 2, 1] (10) to select “Start” and press [ENTER] (10).

Recording starts.

For your reference

Press [STATUS] (28) during recording to show the remaining time.

DVD-RAM

REC 83

ARD

LR

It is not possible to change channel or recording mode while

flexible recording is paused.

Recording time reduces if you repeatedly pause recording.

20

Page 20
Image 20
Panasonic DMR-E51 manual One Touch Recording-Specify a time to stop recording, Flexible recording mode FR