Timer recording (continued)
ªTo change the programme
TIMER |
|
|
|
| Remain |
| |
|
|
|
| 1:58 SP | |||
RECORDING |
|
| |||||
|
|
|
|
| 1:19:00 | 12.7 TUE | |
|
| Name | Date | Start | Stop | Mode | |
| 64 ABC | 12/ 7 TUE | 1:00 | 2:00 | SP | ||
|
|
|
|
|
| Title | |
|
| Press ENTER to store new programme. |
| ||||
SELECT |
|
| CANCEL | No. |
|
|
|
ENTER |
| RETURN | 0 | 9 |
|
| |
|
|
|
|
|
|
|
|
Timer Programme Correction screen (After step 3 on page 24)
1)Use [2, 1] (10) to select the item you want to change.
2)Change the setting with [3, 4] (10).
≥You may use the numeric buttons (4) to enter “Name”, “Date”, “Start” and “Stop”.
The items change as follows:
≥Name (Programme Position/TV Station Name)
≥Date
Current date>the day before one month later>
Daily (Sunday to Saturday)>Daily (Monday to Saturday)> Daily (Monday to Friday)>Weekly (Sundays)>...>
Weekly (Saturdays)
≥Start (start time)/Stop (finish time)
The time increases or decreases in
≥Mode (Recording mode) XP>SP>LP>EP>FR (page 19)
≥Title
Select “Title” and press [ENTER] (10), then refer to page 29 for entering title.
You can give
3)Press [ENTER] (10) when you have finished making changes. The Timer Programme List screen appears.
ªIf “– –” appears under “Name” after entering a
G-CODE number
Name stands for Programme Position/TV Station Name. Normally, the name of the TV station or the number of the programme position is displayed under “Name”.
However, if the TV station information was not automatically set during Auto Setup due to adverse reception conditions, the “–
In such a case, follow the operation steps below to correct it.
Use [3, 4] (10) repeatedly to select the programme position on which the TV programme to be recorded will be broadcast.
After you have entered the information of a TV station, it remains stored in the unit’s memory, and you do not need to enter it again in the future.
Notes
≥The
≥The actual time recorded may be longer than the programme itself when television programmes are recorded using
≥“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
≥“PROG FULL” is displayed in the unit’s display if there are already 16 items programmed. Delete unnecessary items (page 27).
≥The remaining time displayed is calculated based on the current recording mode.
≥When recording more than one programme in a row, for DVD- RAM the first few seconds, and for
≥Recording is not possible unless you set “Disc Protection” in “DISC INFORMATION” to “Off”. (page 30)
≥You can not record to a disc if the write protect tab on a cartridge disc is set to protect. Release this before operation (page 64).
≥Even if the unit is put in the timer recording standby mode or the timer recording is being performed, you can play a programme.
25
