Panasonic DMR-EH75V Various on-screen display indications, Playing a video cassette, Press STATUS

Playing a video cassette

Refer to the control reference on page 48.

Various on-screen display indications

On-screen display below appears during play on VHS.

To see these displays, set “Status Messages” to “Automatic”. (l 76)

Press [STATUS].

1 2 3 4

VHS Mono L

0:00.22	5
1 SP 1
	6

1	Current drive
2	Audio indicators
	The Left (Mono L) and Right (Mono R) indicators show
	which sound mode is selected as follows:
	Stereo:	Stereo indicators appear.
	Mono L:	The Mono L indicator appears.
	Mono R:	The Mono R indicator appears.
	Normal:	Neither the L nor R indicator appears.
3	Operation status display
4	Shows the tape counter and remaining tape time
	Pressing [STATUS] once makes the on-screen display
	appear. After that, press the button repeatedly to change
	the display as follows:
	No display > Tape counter > Remaining tape time
	^-----------------------------------------------------------------}
	≥Press [¢, RESET] to reset the tape counter (elapsed
	time) to “0:00.00”. The tape counter is automatically reset
	to “0:00.00” when inserting a video cassette.
	≥The remaining time is approximate. It will be incorrect if
	you set the wrong tape time in “Select Tape Length” in the
	“VHS” menu and if the tape is of poor quality. (l 77)
5	Cassette-in indicator
	Shows whether you have inserted a video cassette.
6	Recording mode indicator (l 15, 28)

Note

≥The on-screen display may be distorted depending on the playback tape or the input signal.

≥Status messages appear while stopped or recording. (l 42)

50

RQT8346