Specifications
Recording system: DVD Video Recording format
Optical
Recordable discs:
Ver. 2.0
Ver.
DVD-R :
for General Ver. 2.0
for General Ver.
Ver.
+R :
Ver. 1.0
Ver. 1.1
Ver. 1.2
Recording time:
Maximum 8 hours (with 4.7 GB disc)
XP: Approx. 60 minutes SP: Approx. 120 minutes
LP: Approx. 240 minutes EP: Approx. 360 minutes or 480 minutes
Playable discs:
DVD-RAM, DVD-R, DVD-RW, +R,
+RW,
Video system |
|
|
|
|
|
TV system: | NTSC color signal, 525 lines, 60 fields | ||||
Recording system: |
| MPEG2 (Hybrid VBR) | |||
Input: | LINE (pin jack) ×3, |
| 1.0 | ||
| S connector ×3 | Y: | 1.0 | ||
|
| C: | 0.286 | ||
Output: | LINE (pin jack) ×1, |
| 1.0 | ||
| S connector ×1 | Y: | 1.0 | ||
|
| C: | 0.286 | ||
Component video output (480p/480i): | Y: | 1.0 | |||
|
| PB: | 0.7 | Ω | |
|
| PR: | 0.7 | Ω | |
Antenna reception input:TV Channel: |
| 2 | Ω | ||
| CATV Channel: | 1 | Ω | ||
Audio system |
|
|
|
Recording system: |
| Dolby Digital (XP/SP/LP/EP) | |
Input: |
| LINE (pin jack) ×3 | |
|
| Reference input: 309 mVrms | |
|
| FS: 2 Vrms (1 kHz, 0 dB) | |
|
| Input impedance: 47 kΩ | |
Output: |
| LINE (pin jack) ×1 | |
|
| Reference output: 309 mVrms | |
|
| FS: 2 Vrms (1 kHz, 0 dB) | |
|
| Output impedance: 1 kΩ | |
|
| (Load impedance: 10 kΩ) | |
Number of channels: |
| Recording: | 2 channels |
|
| Playback: | 2 channels |
Other input/output connectors: |
|
| |
| Digital audio optical output connector | ||
Operating temperature range: | 5 | ||
Operating humidity range: | 10 | ||
Clock unit: | |||
LASER Specification
Class 1 LASER Product
Wave length:
662 nm wavelength for DVDs, 795 nm wavelength for CDs
Laser power:
No hazardous radiation is emitted with the safety protection
Power supply | AC 120 V, 60 Hz |
Power consumption: | Approx. 23 W |
Dimensions (W × H × D): | Approx. 430 mm × 63 mm × 337 mm |
| (Approx. 1615/16″ × 21/2″ × 135/16″) |
| (excluding protrusions) |
Mass: | Approx. 3.6 kg (7.94 lbs) |
Power consumption in standby mode: approx. 8.2 W
Note
Specifications are subject to change without notice. Mass and dimensions are approximate.
Maintenance
The precision parts in this unit are readily affected by the environment, especially temperature, humidity, and dust. Cigarette smoke also can cause malfunction or breakdown.
To clean this unit, wipe with a soft, dry cloth.
•Never use alcohol, paint thinner or benzine to clean this unit.
•Before using chemically treated cloth, carefully read the instructions that came with the cloth.
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS 2.0 + Digital Out” are trademarks of Digital Theater Systems, Inc.
Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only.
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation.
Observe the following points to ensure continued listening and viewing pleasure.
Dust and dirt may adhere to the unit’s lens over time, making it impossible to record or play discs.
Use the lens cleaner about once every year, depending on frequency of use and the operating environment. Read the lens cleaner’s instructions carefully before use.
Lens cleaner:
Pats. 5,307,173; 5,335,079; 4,908,713; 4,751,578; and 4,706,121
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
MPEG
Reference
RQT8009
35
