RQTC0128
By connecting to an HDMI compatible high-definition television, video recordings can be converted to, and output as, high-definition video (1080p,1080i).
You can also enjoy surround sound by connecting to an HDMI compatible amplifier with multi-channel output terminals.

Enjoying higher quality audio and video (HDMI connection) ( Page 25, Glossary)

1 Audio will be output in 2 channels when output as PCM. Change “DOLBY DIGITAL” and “DTS” ( page 20, “AUDIO” menu).
2 You can also use the S VIDEO and COMPONENT VIDEO terminals.
To enjoy high-definition video, connect to an HDMI compatible high-definition television and set “VIDEO FORMAT” ( page 18, On-Screen Menu 4).
For stable operation and preventing deterioration of video quality, please purchase an HDMI cable 5.0 m (16 2/5 feet) or less in length with the HDMI logo.
It is compatible with the EZ SyncTM “HDAVI ControlTM” ( page 24).
•
•
•
9

Connection/The remote control/QUICK SETUP

COAXIAL IN

Amplifier with a built-in decoder or a
decoder-amplifier combination
Coaxial cable

Enjoying surround sound

Set “AUDIO OUT” to “OFF”
( page 20, “HDMI” menu), and change
“PCM OUTPUT”, “DOLBY DIGITAL” and
“DTS” ( page 20, “AUDIO” menu).

Connect the AC power supply cord last

Conserving power

This unit consumes a small amount of power, even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.

BatteriesInsert so the poles (4 and 3) match those in the remote

control.
Do not use rechargeable type batteries.

Do not:

mix old and new batteries.
use different types at the same time.
heat or expose to flame.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
•
•
•
•
•
•
•
•
To household AC outlet
AC IN

R6/LR6, AA

Mishandling of batteries can cause electrolyte leakage which
can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.

Use

Aim at the remote control sensor ( page 10), avoiding
obstacles, at a maximum range of 7 m (23 feet) directly in front
of the unit.
You cannot use DTS Digital Surround
decoders not suited to DVD.
•
STEP 2 The remote control
AC power supply cord (included)
STEP 3 QUICK SETUP
1

Power on

Select
2 3

Follow the message and

make the settings.

4

Press to exit.

Register
Turn on the television and select the appropriate video input on the television.
To change these settings later, select “QUICK SETUP” ( page 20, “OTHERS” menu).

Shows QUICK

SETUP screen.

Back of the unit

Press to finish

QUICK SETUP.

5

For areas except the U.S.A. and Canada

If the power plug does not fit your AC outlet, use the
power plug adaptor (included). If it still doesn’t fit,
contact an electrical parts distributor for assistance.
DVD-S53 (RQTC0128-2P)_P_PC_PX.indd 9 3/23/2007 3:36:00 PM