Measuring Your Blood Pressure
1. Place the arm to which the device is attached on top of the storage case with the wrist positioned at the level of the heart.
(Please see “Obtaining Accurate Measurements” on pages 14 and 15.)
2. Press the wrist height button briefly.
• Wrist height sensor function will start. (For wrist height sensor, see pages 16 and 17.)
(Measurement will not start until the Off/On Start button is pressed.)
Note: Height setting is reset when it is pressed for 3 seconds or longer.
3. Fine adjust the arm angle.
• Fine adjust the angle of your arm so the wrist will be at the appropriate height.
• Wrist height sensor lamp will turn on when your wrist is at an appropriate height. (Please see pages 16 and 17.)
• Wrist height sensor lamp will turn off a short period while after the measurement starts.
You can also start measurement by proceeding to the step “4. Press the Off/On Start button.” without pressing the wrist height button. In such a case, both the blood pressure measurement and the wrist height sensor function will start simultaneously.
