Movement Detection Function
If movement is detected while measurement is being carried out and more
pressure is applied by the pressure cuff, the 
mark will be displayed.
•Please carry out blood pressure measurement again if the 
mark flashes or is lit.
•If the hand or wrist to which the pressure cuff is attached is moved while measurement is being carried out (e.g. wrist is bent suddenly), in some cases correct measurements may not be obtained.
•When movement has been detected during measurement, the 
mark flashes when the blood pressure reading obtained during that measurement is displayed.
(If this reading is saved, the 
mark will be lit up whenever it is recalled.)
Movement Mark |
| Explanation |
| |||
|
|
| Movement has been detected. |
| ||
|
|
| • The hand or wrist has been bent suddenly. |
| ||
|
|
| • The muscles in the hand or wrist have been | |||
|
|
| tensed. |
| ||
|
|
| • The hand or wrist has been moved, etc. |
| ||
|
|
| With proper posture, please take the measurement | |||
|
|
| again after measurement has been completed | |||
Flashing | ||||||
(please see pages 14 and 15). |
| |||||
|
|
|
| |||
|
|
| Movement has been detected that will significantly | |||
Flashing | affect the reading. |
| ||||
• Significant movement has been detected. |
| |||||
|
|
|
| |||
|
|
| • Movement has been detected repeatedly. |
| ||
|
|
| • Significant hand or wrist movement has been | |||
|
|
| detected, etc. |
| ||
|
|
| Please take the measurement again (A | will | ||
|
|
| appear on the display). |
| ||
|
|
| * A | will also appear on the display in the | ||
|
|
| following cases: |
| ||
Lit |
| |||||
• When the pressure cuff | ||||||
|
|
| ||||
|
|
| has become loose, etc. |
| ||
*This function is designed to help you to take measurements accurately. Even if the Movement mark is not displayed, we recommend that measurements be taken
