Saving and Recalling Data (cont.)
(After approx. | (Data | |
2 seconds) | number) | |
(After approx. | (Year) | |
2 seconds) | ||
| ||
(After approx. | (Date) | |
2 seconds) | ||
|
(After approx. (Time) 2 seconds)
2.Saving complete.
•Up to 270 sets of readings can be stored in memory and each is assigned a number. When the limit is reached, any new readings are recorded over existing readings starting with the oldest ones. The data numbers will also be changed.
•It is not possible to save readings when measurement has not been carried out
successfully (i.e. when a 
is displayed). As nothing will be recorded the data number will not be changed.
*When the 
mark is displayed for the pulse rate, readings can be saved.
•The memory number, measurement year, date, and time are alternately displayed in approximately 2 seconds.
Recalling Stored Data
Readings can be recalled after being saved without having to first turn the device on.
1. Press the Memory/Recall button.
• The average of all recorded readings will be displayed.
• The 
mark will be displayed.
• If, for example, 270 sets of readings have been saved in the memory then the average of those 270 sets of readings will be displayed.
