Fitting the Pressure Cuff
Blood pressure is measured at your left wrist. It is not necessary to roll up
your sleeve or to remove any clothing.
Place the device on the inside of your wrist.
1.Place the device on the inside of your wrist.
•Place the device directly in contact with the skin.
•The device can be used by people with a wrist
Wrap the pressure cuff so that the positioning mark is aligned with the base of the wrist.
circumference of 5˝–8-3/4˝ (12.5–22.0 cm).
Fastener 
Fastener
Base of the wrist
Wrap the pressure cuff so that the positioning mark will be at the center of the wrist.
2.Firmly wrap and fasten using the hoop and loop fastener.
•A loosely applied pressure cuff will result in high blood readings or incapable measurement.
•Press fastener softly to avoid the peel off.
