
Adjusting the orbital stroke mode
•Adjust the orbital stroke mode to the object to be cut.
|
| 3 | 2 |
|
|
| 1 |
|
|
| 0 |
Lever | Blade |
| Main |
position | movement | applications | |
|
| • Cutting hard met- | |
|
| als such as steel | |
|
| • Smooth cutting of | |
0 |
| building materials | |
| and plywood | ||
|
| boards | |
| Vertical only | • Cutting around | |
| small curves | ||
|
| ||
|
| • Cutting softer | |
|
| metals such as | |
|
| aluminum and | |
|
| other | |
1 |
| metals | |
|
| • Cutting hardwood, | |
|
| plywood boards | |
| Low orbital stroke | and plastics | |
| mode |
|
|
|
| • Cutting fairly soft | |
|
| materials | |
|
| • Cutting wood and | |
2 |
| composite boards | |
| • | ||
|
| ting of aluminum | |
| Medium orbital | and soft steel | |
|
|
| |
| stroke mode |
|
|
|
| • Cutting soft mate- | |
|
| rials |
|
|
| • | |
3 |
| ting of materials | |
| such as wood, | ||
|
| composite boards | |
|
| and plastics | |
| High orbital |
|
|
| stroke mode |
|
|
•If you would like to produce a cleaner finish, set the orbital stroke mode to a lower level.
Anti-splintering plate
Use the
Installation
1.Set the base at 90 degree position.
2.Place the
•Install so that the beveled edge of the slot in the middle of the
Dust adapter for vacuum cleaner (EY9H009E) (Available as an ac- cessory, not included)
You can use a vacuum cleaner to collect cutting dust while cutting.
Installation
1.Attach the hook of the dust collection adapter to the front of the base.
2.Snap the rear to install it.
3.Attach the hose of the vacuum cleaner.
- 9 -