Panasonic GT01 5.3.8 When Performing General-purpose Serial Communication

5.3.8 When Performing General-purpose Serial Communication

For GT01, GT11 and GT21

Error code

Error name

Measures

ER00 BCC error

The value of BCC may be incorrect. Check if there is no

calculation mistake.

ER01

Format error

A command format may be incorrect. Check if it is correct.

ER02 NOT supported error

A command used is not supported with the version of the

GT. Upgrade the version of the GT, or use another

command.

ER03 Address error

The address specified does not exist in the GT. Check the

address of the transmitted command.

ER04 Receive buffer overflow

The sent command exceeds the receivable number of

bytes. Check the number of bytes of the sent command.

ER05 Requested overflow

The sent readout command exceeds the number of bytes

that can send back. Check the number of the read words.

ER06 Data error

The communication condition for the GT may be

unmatched with the condition for a destination device.

Check the communication conditions.

ER07 Data write inhibit error

A command for the address that writingn is not available

was sent. Check the address of the sent command.

For GT02, GT02, GT05, GT12, GT32 and GT32-E