Touch screen
Various screens are displayed here. Switches can be operated and data entered simply by touching the
touch screen.
(A sheet is affixed to the touch panel to protect it from scratches when shipping. Please remove it before
using the GT.)
Optional protective sheets are available to protect the touch screen surface and keep it clean.
Reference: <1.4.2 Options and Repair Parts>
COM port and power supply terminal
This is a communication port (RS232C or RS422) for connecting to a PLC, host PC, or microcomputer
board, and a power supply terminal for operation.
TOOL port (GTWIN connection port)
This port is used to connect the screen creation tool.
Operation mode setting switches
Setting the operation mode setting switches as follows when turning on the power supply enables the
setting to inhibit to move to the system menu or enables to clear F-ROM.
Setting
Normal use
(Factory default)
Inhibit system menu shift Clear F-ROM
Switch setting
Note: Do not use any settings other than the above settings.
Waterproof packing
This assures that the front panel is waterproof.
Battery cover (for GT11 and GT21)
When using a backup battery to be separately purchased, open this battery cover to install it.
The clock, PLC device hold data, alarm history and GT internal device hold data functions can be used
with the backup battery.
Reference: <3.6.2 How to Install the Battery (Lithium Button Battery)>
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: info@ctiautomation.net