- 113 -
Do not use any other USB cables except the supplied one. (O peration is not guaranteed with any
other USB cables.)
When this unit is connected to a Panasonic Blu-ray disc reco rder or a DVD recorder using a USB
cable while the unit is turned on, power is also supplie d from the connected equipment to this
unit.
For details on dubbing and playback methods, read the operating instructions of the Blu-ray disc
recorder or DVD recorder.
When you connect the unit to a Blu-ray disc record er, a dubbing operations screen may appear
on the television connected to the Blu-ray disc recorder. In this case as well, per form the
operations of Steps 1 to 4.
You cannot change the mode of the unit or turn off the unit while it is con nected to a Blu-ray disc
recorder or DVD recorder. Disconnect the USB cable before perf orming either of these
operations.
If the battery runs down during dubbing, a message will appear. Operate the Blu-ray disc recorder
to cancel the dubbing.
If you convert the recording format of the scenes re corded in 1080/60p to 1080/60i, you can dub
them to devices that do not support AVCHD Progressive. (l104)
About the screen indication of the unit
When the unit is accessing the SD card, card access icon ( ) appears on the unit screen
or the access lamp is on.
When the unit is accessing the built-in memory, built-in memory access icon ( ) appears
on the unit screen or the access lamp is on.
Be careful not to disconnect the USB cable, AC adaptor or batter y while the unit is accessing
the media, as this may result in the loss of recorded content.
HC-V520M
HC-V520M