- 91 -
Deleting part of a scene (AVCHD)
Unnecessary part of an AVCHD scene can be deleted.
The deleted scenes cannot be restored .
≥Change the mode to and touch the play mode select icon. Then, select the AVCHD
scene. (l27)
1Select the menu.
2Touch the scene with a part to delete.
3Set the section to delete by touching and sliding
the top and bottom section selection buttons .
≥It is convenient to use Slow-motion Playback and Frame-by-
frame Playback. (l76)
4Touch [ENTER].
5Confirm (play back) the scene after editing by touching [YES].
≥A confirmation message appears when [NO] is touched. Proceed to Step 7.
6Stop the playback.
≥A confirmation message appears.
7Touch [ENTER].
≥Repeat Steps 2-7 to continuously delete parts from other scenes.
To complete editing
Touch [Return].
≥Deleting a part of a scene cannot be performed when th ere are 99 scenes in a single date.
≥It may not be possible to delete part of a scene with a sh ort recording time.
≥The scene will be divided into two scenes when the middle part of a scene is deleted.
≥
The relay information is deleted when part of a scene that was relay recorded is deleted, making
it impossible to perform the Relay scene combining. (l96)
: [EDIT SCENE] # [SECTION DELETE]
MENU
0h00m15s0h00m15s0h00m15s
HC-V520M