- 14 -

Inserting/removing an SD card

Caution:
Check that the access lamp has gone off.
1Open the SD card cover and insert (remove) the SD card into (from) the card
slot B.
Face the terminal side C in the direction shown in the illustration and press it straight in as far as
it will go.
Press the center of the SD card and then pull it straight out.
2Securely close the SD card cover.
Securely close it until it clicks.
Do not touch the terminals on the back of the
SD card.
Do not apply strong shocks, bend, or drop the
SD card.
Electrical noise, static electricity or the failure
of this unit or the SD card may damage or
erase the data stored on the SD card.
When the card access lamp is lit, do not:
jRemove the SD card
jTurn the unit off
jInsert and remove the USB cable
jExpose the unit to vibrations or shock
Performing the above while the lamp is on
may result in damage to data/SD card or this
unit.
Do not expose the terminals of the SD card to
water, dirt or dust.
Do not place SD cards in the following areas:
jIn direct sunlight
jIn very dusty or humid areas
jNear a heater
jLocations susceptible to significant
difference in temperature (condensation
can occur.)
jWhere static electricity or electromagnetic
waves occur
To protect SD cards, return them to their
cases when you are not using them.
About disposing of or giving away the SD
card. (l182)
When using an SD card not from Panasonic, or on e previously used on other equipment, for the
first time on this unit, format the SD card. (l37) When the S D card is formatted, all of the
recorded data is deleted. Once the data is deleted, it canno t be restored.

Access lamp [ACCESS] A

When this unit is accessing the
SD card or built-in memory, the
access lamp lights up.