- 56 -
In Motion Picture Recording Mode, you can furthe r improve optical image stabilization by
touching and holding . With this function, you can further redu ce the effects of the
shake that tends to occur when using zoom.
1Press the Optical Image Stabilizer button to turn the Image Stabilizer on.
2Touch and hold .
≥Icon is displayed in A while you are touching and holding .
≥Optical Image Stabilizer Lock is released when you remove your finger from the icon.
∫To make the display of disappearDisplay of will not disappear even whe n no operation is performed for specific time with the
default setting. To make the display of disappear, change the s etting of the [O.I.S. LOCK
DISPLAY].
≥Stabilization may not be possible under strong shaking conditions.
≥To record while moving the unit quickly, release Optical Image Stabilizer Lock.
It is possible to focus and record a still p icture of a subject that is touched.
1Touch .
2Touch the subject.
≥Focus area is displayed at the touched position, and a sti ll
picture is recorded.
≥Depending on the recording conditions or recognition of the touched position, it may not be
possible to record the intended picture.
≥This will not operate for recording yourself.
Optical Image Stabilizer Lock: [SETUP] # [O.I.S. LOCK DISPLAY] # desired setting
[ON]: Constantly display.
[OFF]: The icon will disappear after approx. 5 seconds without any touch operation.
Touch ShutterMENU