- 117 -
≥The Eye-Fi menu only appears when an Eye-Fi ca rd is used.
≥The Eye-Fi transfer feature cannot be guaranteed to continue to operate in the future due to
changes to the card specification etc.
≥Update the firmware of the Eye-Fi card to the late st one using the software supplied with the Eye-
Fi card before use.
≥When the endless memory function of the Eye-Fi card is set to on, the files transferred from the
card may be deleted automatically.
≥The Eye-Fi card may heat up as a result of the files being transferred. Note that the use of an
Eye-Fi card accelerates the battery drain, so we recommend you use the card in Pl ayback Mode.
≥The Eye-Fi setting can be checked while pausing the reco rding.
≥If the Eye-Fi card is removed and then reinserted into the unit, set functions related to Eye-Fi
again from the menu.
≥When using the Eye-Fi card, please be sure to unlock the write-pr otect switch. (l13)
≥Before deleting the files, please confirm they have bee n transferred to your PC and uploaded to
the sharing site.
≥Do not use the Eye-Fi card in locations where the us e of wireless devices is forbidden, such as
inside aircraft etc.
≥Depending on network conditions, the transfer may take some time. Also, if network conditions
deteriorate, the transfer may be suspended.
≥Files over 2 GB in size cannot be transferred. Such files sh ould first be split to reduce the file size.
(l92)
[Eye-Fi TRANSFER] is set to [ON]
(Transferring in Eye-Fi direct mode )
[Eye-Fi TRANSFER] is set to [ON]
[Eye-Fi TRANSFER] is set to [OFF]