- 116 -
∫Using Eye-Fi direct mode
The files can be transferred directly from the Eye-Fi car d to a smartphone or tablet without going
through the access point when necessary setting is perfor med in a PC in advance.

≥Install the software supplied with the Eye-Fi card on your PC, and configure the

Eye-Fi direct mode settings.

≥Inserting an Eye-Fi card (commercially available) to the unit
Select the menu.
≥This mode is displayed only when [Eye-Fi TRANSFER] is set to [ON].
≥The mode will be canceled using the following steps.
jWhen the unit is turned off
jIf you start recording motion picture
In addition to the steps above, the mode may also be canc eled by the Eye-Fi card.
≥When connected via Eye-Fi direct mode, [ECONOMY (BATT)]/[ECONOMY (AC)] are disa bled.
∫Selecting files to transfer
If you perform the required settings in advance on yo ur PC, you can transfer selected files alone.
For settings methods etc., please read the card operatin g instructions or consult the card
manufacturer.
≥Install the software supplied with the Eye-Fi card on your P C, and configure the selection
transfer settings.
≥Inserting an Eye-Fi card (commercially available) to the unit
≥/
Change the mode to and touch the play mode select icon. Then, select [iFrame],
[MP4] or [PICTURE]. (l27)
Change the mode to and touch the play mode select icon, and set the media to
(card), and set the motion picture/still p icture to [iFrame], [MP4] or [PICTURE]. (l27)
Select the menu.
≥The setting method is the same as that for the scene pro tect settings. (l94)
≥If the selected transfer setting is not configured on the computer, [SCENE PROT ECT] is
displayed and the selected transfer setting cannot be config ured.
≥When the write protect switch on the Eye-Fi card is on the LOCK side , [SCENE PROTECT] is
displayed and selected transfer setting is disabled. Please un lock the write protect switch.
≥The protect setting is also applied to the files for which [TRANSFER/PROTECT] is set. To delete
or rotate a file, first cancel [TRANSFER/PROTECT] an d then perform the operation.
≥AVCHD scenes cannot be used as the selected transfer setting.
: [SETUP] # [Eye-Fi DIRECT]
: [VIDEO SETUP] or [PICT. SETUP] # [TRANSFER/PROTECT]
MENU
HC-V520
HC-V510
HC-V520M
MENU