- 34 -
This unit is put into recording pause approx. 0.6 secon ds after the LCD monitor is reopened.
≥When in Quick Start Standby Mode about 70% of the power used in recording pause mode
is being consumed, so the recording time will be re duced.
≥/
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
1Select the menu.
2Close the LCD monitor.
The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
≥The lens cover does not close.
3Open the LCD monitor.
The status indicator A lights red and the unit is put
into recording pause.
≥Quick Start Standby Mode is canceled if
jabout 5 minutes elapsed
jmode is set to
≥Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥It may take some time for Automatic White Balance to adjust.
≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
(l33)/[ECONOMY (AC)] (l33), close the LCD monitor once and ope n it again.
≥Turn the unit off using the power button.
Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this
sound.
When [OFF] is selected, the sound is not output at the start/end o f recording, etc.
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the scre en. (l171)
[QUICK START]: [SETUP] # [QUICK START] # [ON]
[ALERT SOUND]: [SETUP] # [ALERT SOUND] # desired setting
(Volume low)/ (Volume high)/[OFF]
HC-V520
HC-V510
HC-V520M
MENU
MENU