Panasonic HDC-SD9PC Select the date print setting on DATE PRINT, When you stop printing halfway

5 Press the MENU button to display the PictBridge menus.

MENU

6 Select the date print setting on [DATE PRINT].

≥If the printer is not capable of date printing, this setting is unavailable.

7 Select the paper size setting on [PAPER SIZE].

[STANDARD]:	Size specific to the printer
[4k5 INCH]:	L size
[5k7 INCH]:	2L size
[4k6 INCH]:	Postcard size
[A4]:	A4 size

≥You cannot set paper sizes not supported on the printer.

94

8 Select the desired layout setting on [PAGE LAYOUT].

[STANDARD]: Layout specific to the printer

[	]:		No frame print
[		]:	Frame print

≥You cannot set page layouts not supported on the printer.

9 Select [PRINT] # [YES] and press the cursor button to print the pictures.

≥Exit PictBridge by disconnecting the USB cable (supplied) after the pictures have been printed.

When you stop printing halfway

Move the cursor button down.

≥A confirmation message appears. If [YES] is selected, the number of prints set is canceled and the screen returns to step 3. If [NO] is selected, all the settings are kept and the screen returns to step 3.

≥Avoid the following operations during printing. These operations disable proper printing. jDisconnecting the USB cable jOpening the SD card cover and removing

the SD card jSwitching the mode switch jTurn the unit off

≥Check the settings for the paper size, print quality etc. on the printer.

≥The print quality varies with paper size.

≥The edges of still pictures recorded in this unit with a 16:9 aspect ratio may be cut off. When using a printer with a trimming or borderless printing function, cancel this function before printing. (Refer to the operating instructions of the printer for details.)

≥When the unit is connected directly to the printer, the DPOF settings cannot be used.

≥Connect the printer directly to this unit. Do not use a USB hub.

VQT1N45