Panasonic HDC-SD9PC manual Problem, The indication disappears The screen is frozen, Check points

Problem

The indication disappears.

The screen is frozen.

No operation can be performed.

White round spots like soap bubbles appear on the recorded picture.

“PUSH THE RESET SWITCH.” is displayed.

Check points

≥No operation can be performed on this unit when it is connected to a PC.

≥Turn off the power to this unit. If the power cannot be turned off, press the RESET button, or remove the battery or AC adaptor and then reattach it. Turn on the power again. If normal operation is still not restored, detach the power connected, and contact consumer support. (l 136, 137)

≥If you take a picture with the flash in a dark place or indoors, white round spots may appear on the picture caused by the flash reflecting of particles of dust in the air. This is not a malfunction.

A characteristic of this is that the number of round spots and their position differ in every picture.

≥The unit has automatically detected an error. Press the RESET button with the projecting part of the grip belt A. This will restart the unit.

≥If you do not press the RESET button, the power to this unit is turned off automatically about 1 minute later.

≥Even after you press the RESET button, the indication may still appear repeatedly. If so, this unit needs repair. Detach the power connected, contact consumer support. (l 136, 137) Do not attempt to repair the unit by yourself.

118

VQT1N45