Panasonic HDC-SD9PC Manual focus adjustment, Move the switch down and set it to Focus position

Portrait mode

≥If this mode is used indoors, the screen may flicker. If so, change the scene mode setting to [OFF].

Spotlight mode

≥If the recording subject is extremely bright, the subject may become washed out and the

periphery extremely darkened.

Surf & snow mode

≥If the subject is extremely bright, the recorded image may become washed out.

Manual focus adjustment

If auto focusing is difficult due to the conditions, then use manual focus.

≥Set the AUTO/MANUAL/FOCUS switch to MANUAL. (l 59)

1 (When MF assist function is used)

Select the menu. (l 27)

[ADVANCED] # [MF ASSIST] # [ON]

≥This function’s default setting is [ON].

2 Move the switch down and set it to FOCUS position.

≥MF assist does not work if the zoom magnification is more than 10k.

≥The part of the screen that is enlarged is not enlarged on the image actually recorded.

≥The zebra pattern does not appear on the part of the screen that is enlarged when [ZEBRA] is [ON].

AUTO

MANUAL

FOCUS

The manual focus indication [MF] and the icon shown in the illustration appear.

3 Move the cursor button to bring the subject into focus.

The center of the screen is enlarged. The normal screen returns approximately 2 seconds after you finish bringing the subject into focus.

≥The center of the screen is not enlarged when [MF ASSIST] is [OFF].

≥Move the AUTO/MANUAL/FOCUS switch down again to the FOCUS or AUTO position to restore to the automatic adjustment.

60

VQT1N45