125
VQT2M75
With a PC
Setup 2Connecting to a PC
≥Connect this unit to the PC after the software applications are installed.
≥Remove the supplied CD-ROM from your PC.
AUSB cable (supplied)
1Connect this unit to the AC adaptor.
≥It is possible to use the unit connected to the PC with the batteries only, but you will not be
able to write data into the unit.
≥Connect with the AC adaptor when using the Conversion Assist Function.
2Turn on the unit.
≥This function is available in all modes.
3Connect this unit to a PC.
≥Do not use any other USB cables except the supplied one. (Operation is not guaranteed
with any other USB cables.)
≥The Smart wizard screen is automatically displayed when HDWriter AE 2.1 is installed.
≥This unit is automatically recognized as an external drive of the PC. (l127)
≥When HD Writer AE 2.1 is not installed, a USB functi on s el ection s cre en will appe ar. Touch
[PC]. When you select an option other than [PC], reconnect the USB cable.
≥When using an SDXC Memory Card, check the following support site.
http://panasonic.net/avc/sdcard/information/SDXC.html
HDC-TM700&HS700P&PC-VQT2M75_mst.book 125 ページ 2010年2月23日 火曜日 午前10時34分