[WIND NOISE CANCELER]

This will reduce the wind noise coming into the built-in microphones while maintaining the realism.

Change the mode to .

Switch to Manual Mode. (l 82)

: [RECORD SETUP] # [WIND NOISE CANCELER] # [ON]

When switching to Intelligent Auto Mode, [WIND NOISE CANCELER] is set to [ON], and the setting cannot be changed.

You may not see the full effect depending on the recording conditions.

If wind sound cannot be reduced with the Wind noise canceler function alone, set [BASS SETTING] to [LOWCUT]. (l 75)

[MIC SETUP]

Recording setting of the built-in microphone can be adjusted.

Change the mode to .

Switch to Manual Mode. (l 82)

: [RECORD SETUP] # [MIC SETUP] # desired setting

[SURROUND]:

Sound is recorded with 5.1 ch surround microphone.

[ZOOM MIC]:

Directivity of the microphone is synchronized with the zoom

 

operation. Sounds near the front of the unit are recorded more

 

clearly if you zoom in (close-up) and surrounding sounds are

 

recorded more realistically if you zoom out (wide angle).

[FOCUS MIC]:

Directivity of the center is enhanced for recording audio

 

near the front of the unit more clearly.

[STEREO MIC]:

Sound from two directions is recorded in 2 ch by forward-

 

facing stereo microphones.

 

 

If you wish to record higher quality sound and maintain realism even when zooming in, for instance, when recording a music recital, we recommend setting [MIC SETUP] to [SURROUND].

73

VQT2M75

Page 73
Image 73
Panasonic HDC-TM700K, HDC-TM700P/PC, HDC-HS700P/PC operating instructions Wind Noise Canceler, MIC Setup