76
VQT2M75
Parts where white saturation (color saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
Change the mode to or .
Switch to Manual Mode. (l82)
You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (l84).
The zebra pattern does not appear on the images actually recorded.
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l84)
Change the mode to or .
Switch to Manual Mode. (l82)
Luminance level is displayed between [0%] and [99%]. It will be displayed as [99% ] when
it is over 99%.
Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
[ZEBRA]
: [RECORD SETUP] # [ZEBRA] # [ON]
It is possible to set from the quick menu in Manual
Mode. (l45)
[LUMINANCE]
: [RECORD SETUP] # [LUMINANCE] # desired setting
It is possible to set from the quick menu in Manual Mode. (l45)
[OFF]:
Cancel the setting.
[ALWAYS]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l84)
ALuminance display frame
BLuminance level
AZebra pattern
50%
HDC-TM700&HS700P&PC-VQT2M75_mst.book 76 ページ 2010年2月23日 火曜日 午前10時34分