104
VQT2M75
Select the desired method of HDMI output.
[AUTO] determines the output resolution automatically based on information from the
connected TV.
If the images are not output on the TV when the setting is [AUTO], switch to the method
[1080p], [1080i] or [480p] which enables the images to be displayed on your TV. (Please
read the operating instructions for the TV.)
Image will not display on TV for a few seconds in the following cases.
jWhen the 1080/60p recording mode is turned on/off during Motion Picture Recording
Mode
jWhen [SELECT VIDEO] is touched during Motion Picture Playback Mode
You still can listen to the 5.1 channel sound recorded from the internal microphones when this unit
is connected to the 5.1 channel compatible AV amplifier or TV using the HDMI mini cable.
Please read the AV amplifier and TV operating instructions for how to con nect this unit to the
AV amplifier and TV.
If you connect this unit to a Panasonic AV amplifier that are compatible with VIERALink,
linked operations (VIERALink) become possible. (l105)
Audio recorded when [MIC SETUP] is set to [STEREO MIC] or recorded from an external
microphone is in stereo (2 ch).
AV multi connector output setting can be changed.

Changing the component output setting

Connecting with a HDMI mini cable
: [SETUP] # [HDMI RESOLUTION] # [AUTO]/[1080p]/[1080i]/[480p]
Listening in 5.1 channel soundConnecting with the AV multi cable
: [SETUP] # [AV MULTI] # desired setting
[COMPONENT]: When connecting to the component terminal
[AV OUT]: When connecting to the video terminal
: [SETUP] # [COMPONENT OUT] # desired setting
[480i]: When connecting to the component terminal on the TV compatible with 480i.
(Playback is in standard quality.)
[1080i]: When connecting to the component terminal on the TV compatible with
1080i. (Playback is in high definition quality.)
HDC-TM700&HS700P&PC-VQT2M75_mst.book 104 ページ 2010年2月23日 火曜日 午前10時34分