84
VQT2M75
Shutter Speed:
Adjust it when recording fast-moving subjects.
Iris:
Adjust it when the screen is too bright or too dark.
Press the iA/MANUAL button or CAMERA FUNCTION button to switch to Manual
Mode. (l82)
For how to perform the settings when using the viewfinder, refer to page 82
1Touch [SHTR] or [IRIS].
2

Touch / to adjust settings.

Shutter speed:
1/60 to 1/8000
If [AUTO SLOW SHTR] is set to [ON], the
shutter speed will be set between 1/30
and 1/8000.
If [DIGITAL CINEMA] is set to [ON], the
shutter speed will be set between 1/48
and 1/8000. (When [AUTO SLOW SHTR]
is set to [ON], the range is 1/24 to 1/8000 .)
The shutter speed closer to 1/8000 is faster.
The shutter speed will be set between 1/2
and 1/2000 in Still Picture Recording Mode.
Iris/Gain value:
CLOSE
!#
(F16 to F1.7)
!#
OPEN
!#
(0dB
to 18dB)
Value closer to [CLOSE] darkens the image.
Value closer to [18dB] brightens the image.
When the iris value is adjusted to br i g ht er
than [OPEN], it changes to the gain value.
To return to auto setting, press the iA/
MANUAL button again.
When setting both the shutter speed an d
the iris/gain value, set the shutter speed
and then set the iris/gain value.
Manual shutter speed adjustment
When the shutter speed is set lower than
1/15 in the Still Picture Recording Mode,
using a tripod is recommended. Also,
white balance cannot be set. The shutter
speed will be set to 1/30 when the power
is turned on again or when the Quick start
is performed.
You may see a band of light around an object
that is shining very bright, or highly reflective.
During normal playback, image movement
may not look smooth.
If you record an extremely bright object or
record under indoor lighting, color and
screen brightness may change or a
horizontal line may appear on the screen.
In this case, record in the Intelligent Auto
Mode or set the shutter speed to 1/60 in
areas where the power supply frequency
is 60 Hz, or 1/100 in areas of 50Hz.
Manual iris/gain adjustment
Luminance level and histogram are
displayed during the iris adjustment.
(l76, 77)
If the gain value is increased, the noise on
the screen increases.
Depending on the zoom magnification,
there are iris values that are not displayed.

Manual shutter speed/iris adjustment

SHTR
IRIS
HDC-TM700&HS700P&PC-VQT2M75_mst.book 84 ページ 2010年2月23日 火曜日 午前10時34分