Panasonic HDC-TM700P/PC, HDC-TM700K, HDC-HS700P/PC Troubleshooting, 135, Problem Check points

Others

Troubleshooting

Problem	Check points
This unit cannot be	≥ Charge the battery again to ensure it is sufficiently
turned on.	charged. (l 22)
	≥ In cold places, the battery using time becomes
This unit does not stay	shorter.
on long enough.	≥ The battery has a limited life. If the operating time is
	still too short even after the battery is fully charged,
Battery runs down	the battery has worn out and needs to be replaced.
quickly.
This unit is turned off	≥ If the power of the unit turns off when you turn off the
automatically.	power to the TV using the TV remote control, the
	VIERA Link is at work. If you are not using the
	VIERA Link, set [VIERA Link] to [OFF]. (l 105)
	≥ When this unit is connected to a DVD burner to copy
	or play back images (a disc is being accessed), the
	power turns off automatically if the Mini AB USB
	Connection Cable is removed.

A clicking sound is heard when the unit is shaken.

Remaining battery indication is not displayed properly.

This unit cannot be operated though it is turned on.

This unit does not operate normally.

≥This is the sound of the lens moving and is not a defect. This sound will no longer be heard when the unit’s

power is turned on and change the mode to	or
.

≥The remaining battery capacity indication is an approximation.

If the remaining battery capacity indication is not displayed correctly, fully charge the battery, discharge it and then charge it again.

≥Remove the battery or AC adaptor, wait about

1 minute and then reconnect the battery or AC adaptor. Then about 1 minute later, turn on the power again. (Conducting the above operation while the media is being accessed may damage the data on the media.)

≥If normal operation is still not restored, detach the power connected, and contact consumer support. (l 161, 162)

135

VQT2M75