Panasonic HDC-TM700P/PC, HDC-TM700K Media Status, Calibration, Touch Format Media

[FORMAT MEDIA]

Please be aware that if a medium is formatted, then all the data recorded on the medium will be erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 109, 117)

1	Touch [FORMAT MEDIA].
2	Touch [SD CARD] or	Touch [SD CARD] or [HDD].
	[Built-inMemory].

≥When formatting is complete, touch [EXIT] to exit the message screen.

≥Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred. (l 144)

≥Perform a physical formatting of the built-in memory/HDD when this unit is to be disposed/ transferred. (l 142)

≥Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to vibrations or shock.

Use this unit to format media.

Formatting built-in memory or HDD is only available with this unit.

Do not format an SD card using any other equipment such as a PC. The card may not be used on this unit.

[MEDIA STATUS]

The amount of space left on the SD card, the built-in memory and HDD can be checked.

(Only when the mode is at the position)

≥Touching [CHANGE MEDIA] switches the unit between the display for the SD card and the display for the built-in memory/HDD.

≥Touch [EXIT] or press the MENU button to close the indication.

≥The SD card, built-in memory or built-in HDD requires some space to store information and manage system files, so the actual usable space is slightly less than the indicated value. The usable built-in memory/HDD space is generally calculated as 1 GB=1,000,000,000 bytes. The capacities of this unit, PCs and software are expressed as

1 GB=1,024k1,024k1,024=1,073,741,824 bytes. Therefore, the indicated value of the capacity appears to be smaller.

[CALIBRATION]

Perform the touch screen calibration if a different object to the one touched is selected.

1Touch [CALIBRATION].

≥ Touch [ENTER].

2Touch the [_] that appears on the screen with the supplied stylus pen.

≥ Touch [_] in sequence (up left # down left # down right # up right # center).

3Touch [ENTER].

≥Calibration cannot be performed when the LCD monitor is turned 180o.

51

VQT2M75