49
VQT2M75
The recording lamp lights up during recording and flashes when the unit receives a signal
from the remote control or when the Self-timer is counting down. When this is set to [OFF], it
does not light during recording.
Touch screen operation, starti ng and stopping of recording and power on/off can be
confirmed with this sound.
(Volume low)/ (Volume high)
2 Beeps for 4 times
When an error occurs. Check the sentence displayed on the screen. (l133)
This makes it easier to view the LCD monitor in bright places including outdoors.
≥These settings will not affect the images actually recorded.
≥It is possible to set from the quick menu. (l45)
(Makes even brighter)/ (Makes brighter)/ (Normal)/ (Makes less bright)/
*(Automatic adjustment)
* It is not displayed in the Manual Mode or in the P l a y b ack Mode.
≥When the AC adaptor is in use, the LCD monitor is set to automatically.
≥The recordable time will become shorter when you use this unit with the LCD monitor lit up.
It adjusts brightness and color density on the LCD monitor.
≥These settings will not affect the images actually recorded.
1Touch [LCD SET].
2 Touch the desired setting item.
[BRIGHTNESS]:
Brightness of the LCD monitor
[COLOR]:
Color level of the LCD monitor
3 Touch / to adjust settings.
4 Touch [ENTER].
���Touch [EXIT] or press the MENU button to exit the menu
screen.
[REC LAMP] [OFF]/[ON]
[ALERT SOUND] [OFF]/ /
[POWER LCD] ////
[LCD SET]+2
+1
0
-
1
A
+2
+1
0
-
1
A
+1
ペペペ 2222年2月22日 火火日 午午22時23分
HDC-TM700&HS700P&PC-VQT2M75_mst.book 49