Item Meaning
Baby monitor is activated.
The name/number displayed
next to the icon indicates the
monitoring unit. (page 28)
Line in
use
Someone is using the line.
*1 Caller ID subscribers only
*2 SMS users only
*3 Voice mail subscribers only
Handset soft key icons
Icon Action
Temporarily turns off the ringer
for incoming calls. (page 14)
WOpens the phonebook.
Selects entries or handsets.
(page 26)
CErases a number/character.
Puts the call on mute.
Turning the power on/offPress MN for about 2 seconds.
Language settingDisplay language
1MMenuN (right soft key) #110
2MbN: Select your desired language. a
MOKN
3MN
Date and time1MMenuN (right soft key) #101
2Enter the current date, month, and year.
a MOKN
Example: 15 July, 2013
15 07 13
RYou can select the date format by
pressing #:
– dd/mm/yy (date/month/year)
– yy/mm/dd
3Enter the current hour and minute.
Example: 9:30
09 30
RYou can select 24-hour or 12-hour
clock format (“AM” or “PM”) by
pressing *.
4MOKN a MN
Other settingsScreen saver mode
The backlight goes dark when on a call or
turns off completely after 1 minute of
inactivity if the handset is not on the base unit
or charger.
Activate the handset display again by:
– pressing MN when on a call.
– pressing MN at all other times.
One touch eco mode
When the handset is on the base unit, the
base unit transmission power is reduced up to
99.9 % if only one handset is registered.
Even when the handset is not on the base unit
or several handsets are registered, the base
unit transmission power in standby mode can
be reduced up to 90 % by activating one touch
eco mode.
You can turn on/off one touch eco mode by
just pressing MR/ECON. The default setting is
“Normal”.
– When the one touch eco mode is on: “Low”
is temporarily displayed and is shown
on the handset display instead of .
– When the one touch eco mode is off:
“Normal” is temporarily displayed and
goes off from the handset display.
12
Getting Started
PRS110FX(en)_0725_ver020.pdf 12 2013/07/25 9:56:11