Panasonic KRS-PRS110FX Call restriction, Changing the base unit PIN, Calendar/Schedule

Programming

Call restriction

You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code.

1MMenuN (right soft key) #256

2Enter the base unit PIN (default: “0000”). R If you forget your PIN, contact an

authorised service centre.

3Select the handsets to be restricted by pressing 1 to 6.

R All handsets registered to the base unit are displayed.

R “” is displayed next to the selected handset numbers.

R To cancel a selected handset, press the same dial key again. “” disappears.

4MOKN

5Select a memory location by pressing 1 to 6. a MOKN

6Enter the phone number or area code to be restricted (8 digits max.). a MOKN a

MN

Changing the base unit PIN

Important:

RIf you change the PIN (Personal Identification Number), please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact an authorised service centre.

1MMenuN (right soft key) #132

2Enter the current 4-digit base unit PIN (default: “0000”).

3Enter the new 4-digit base unit PIN. a

MOKN

4MbN: “Yes” a MOKN a MN

Changing the unit’s region setting/Resetting the base unit

1MMenuN (right soft key) #136

2MbN: Select the desired country. a MOKN “Other” = countries except Czech and Slovakia

“Česká rep.” = Czech “Slovensko” = Slovakia

3MbN: “Yes” a MOKN a MN

Note:

RChanging the unit’s region setting may cause the settings for your country or your customised settings to return to their default settings.

Calendar/Schedule

You can program 20 schedule alarms for each handset using the calendar. A schedule alarm sounds at the set time for 1 minute. A text memo can also be displayed for the schedule alarm.

Important:

RMake sure the unit’s date and time setting is correct (page 12).

Adding a new entry

1MMenuN (right soft key) a a MOKN

2 MbN: Select the desired date. a MOKN

3 MMenuN a MbN: “New Entry” a MOKN 4 Edit the date if necessary. a MOKN

5 Set the desired time. a MOKN

6Enter a text memo (30 characters max.; page 38). a MOKN

7MbN: Select the desired alarm tone. a MOKN 2 times

R You can select “Off” if you prefer not to hear an alarm tone.

R We recommend selecting a different ringer tone from the one used for outside calls.

8MN

30

PRS110FX(en)_0725_ver020.pdf 30

2013/07/25 9:56:13