Setting up
Connections
n Base unit
Connect the AC adaptor plug to the unit
until you hear a click.
Fasten the cord by hooking it.
Connect the AC adaptor to the power
outlet.
Connect the telephone line cord to the
unit until you hear a click.
Fasten the cord by hooking it.
Connect the telephone line cord to the
telephone line jack until you hear a click.
A DSL/ADSL filter (not supplied) is
required if you have a DSL/ADSL service.
Note:
RUse only the supplied Panasonic AC
adaptor PNLV226CE.
RUse only the supplied telephone line cord.
14
76
3
25
Battery installation
RUSE ONLY rechargeable Ni-MH batteries
AAA (R03) size (A).
RDo NOT use Alkaline/Manganese/Ni-Cd
batteries.
RConfirm correct polarities ( , ).
1
RFollow the directions on the display to set
up the unit.
Battery charging
Charge for about 7 hours.
RConfirm “Charging” is displayed (A).
RWhen the batteries are fully charged,
“Fully charged” is displayed.
1
Note when setting up
Note for connections
RThe AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
RThe AC adaptor should be connected to a
vertically oriented or floor-mounted AC
9
Getting Started
PRS110FX(en)_0725_ver020.pdf 9 2013/07/25 9:56:11