Menu list
Problem Cause/solution
The display is in a
language I cannot read.
RChange the display language (page 12).
I cannot activate the eco
mode.
RYou cannot set eco mode when you set the DECT repeater
mode “On”. If required, set the DECT repeater mode to “Off”
(page 32).
I cannot display the
wallpaper.
RWallpaper is displayed in the standby mode only when you
select “Digital(Small)” or “Off” for the clock setting.
Change the clock setting (page 23).
I cannot register a handset
to a base unit.
RThe maximum number of base units (4) is already registered to
the handset. Cancel unused base unit registrations from the
handset (page 32).
RThe maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 32).
RYou entered the wrong PIN. If you forget your PIN, contact an
authorised service centre.
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
RBattery charge is low. Fully charge the batteries (page 9).
I fully charged the
batteries, but
– still flashes or
– the operating time
seems to be shorter.
RClean the battery ends ( , ) and the charge contacts with
a dry cloth and charge again.
RIt is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem Cause/solution
is displayed. RThe handset is too far from the base unit. Move closer.
RThe base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
RThe handset is not registered to the base unit. Register it
(page 31).
RActivating one touch eco mode reduces the range of the base
unit in standby mode. If required, turn eco mode off (page 12).
42
Useful Information
PRS110FX(en)_0725_ver020.pdf 42 2013/07/25 9:56:14