29
Setup
Initial Preparation
Fax Correspondence
Your logo Your facsimile telephone number Date and time
FROM : Panasonic Fax
Example: FAX NO. : 1234567 Feb. 26 1999 04:02PM P1

Date and time, your logo and facsimile

telephone number!

You should program the date and time, your logo and facsimile telephone number. This information will be
printed on each page transmitted from your unit, fulfilling the requirements of the Telephone Protection Act of 1991.

Setting the date and time

/MENU
START/SET/COPY
STOP
JOG DIAL
1Press (MENU).
Display:
2Press (#), then (0)(1).
3Press (START/SET/COPY).
Cursor
4Enter the correct month/day/year by selecting each
2 digits using the dial keypad.
Example: Aug. 10, 1999
Press (0)(8) (1)(0) (9)(9).
5Press (START/SET/COPY).
6Enter the correct hour/minute by selecting each
2 digits using the dial keypad.
Press ($) to select “AM” or “PM”.
Example: 3:15PM
1. Press (0)(3) (1)(5).
2. Press ($) until “PM” is displayed.
TIME: 03:15PM
TIME: 03:15AM
TIME: 12:00AM
M:08/D:10/Y:99
M:01/D:01/Y:99
SET DATE & TIME
1.SYSTEM SET UP
Note:
To enter the year 2000 in step 4, press (0)(0)
for the correct year.
You can enter the number by rotating
(JOG\DIAL) in steps 4 and 6. In this case,
press (fl) to move the cursor.
The accuracy of the clock is approximately
±60 seconds a month.
To correct a mistake
Press (fi) or (fl) to move the cursor to the
incorrect number, then make the correction.
If you press (STOP) while programming, the
display will return to the previous one.
7Press (START/SET/COPY).
8Press (MENU).
SETUP ITEM [ ]