105
Error Messages
For assistance, call 1-800-435-7329.
Help
COMMUNICATION ERROR
DOCUMENT JAMMED
ERROR-NOT YOUR UNIT
MEMORY FULL
NO DOCUMENT
OTHER FAX NOT RESPOND
PC FAIL OR BUSY
PRESSED THE STOP KEY
TOP COVER WAS OPENED
FRONT PANEL WAS OPENED
OK
41–72
FF
54, 59
70
A transmission or reception error occurred. Try again or check
with the other party.
The document is jammed. Remove the jammed document
(p. 116).
A sheet of paper was inserted from the paper tray while
scanning the document. Remove the paper from the paper tray.
A transmission or reception error occurred because of a problem
with the other party’s fax machine. Check with the other party.
The document was not received due to memory being full.
The document was not fed into the unit properly. Reinsert the
document and try again.
The other party’s fax machine was busy or ran out of recording
paper. Try again.
The document was not fed properly. Reinsert the document and
try again.
The other party’s fax machine rings too many times. To send a
fax manually, dial the number, confirm the fax tone, and press
(START/SET/COPY).
The other party’s machine is not a facsimile. Check with the
other party.
The number you dialed is not in service.
The PC cannot control the fax functions. The printer cable is not
connected correctly, or the software is not running on the PC
(p. 82–85).
(STOP) was pressed and fax communication was canceled.
The top cover was opened. Close it and try again.
The front panel was opened. Close it and try again.
Fax communication was successful.
Communication message Error
code Cause & Remedy
Reports!
If your unit cannot send a fax, check the following.
—The number you dialed is correct.
—The other party’s machine is a facsimile.
If the problem remains, correct it by following the communication message printed on the sending and journal
reports (p. 50, 51).