111
Operations
For assistance, call 1-800-435-7329.
Help
Problem Cause & Remedy
≥Point at an area with no buttons or parts and drag it where you
want to move.
≥The brightness of the Main Panel Display shows you whether the
PANA LINK Main Panel is active or not.
<Active – bright, Non active – dark>
≥If the PANA LINK Main Panel is non-active, the quick tip does not
appear. Confirm again after making the PANA LINK Main Panel be
active by clicking anywhere on it.
≥The quick tip is displayed. Move the mouse cursor out of the PANA
LINK Main Panel. If you do not need quick tips, open the setup
dialog and select OFF of the Quick Tip in the System tab.
≥Look in the task tray (in the task bar). If you do not find the PANA
LINK icon, it is closed. If you find the icon, the PANA LINK Main
Panel is just minimized or iconified.
Double-click the icon in the task tray or open the menu by
right-clicking the fax icon then select Restore.
≥The PANA LINK Main Panel is set to minimize when PANA LINK
starts. Double-click the icon in the task tray or open the menu by
right-clicking the fax icon, then select Restore.
If you do not want this to happen each time you start PANA LINK,
press the Setup button in the PANA LINK Main Panel, and check
off the Start minimized check box in the Program startup settings in
the System tab.
≥Press the Stop button.
≥Put a cursor on the line between the buttons, the cursor changes
shape and you can expand the area by dragging, or
double-clicking.
≥The setting of the cover page is ON by default. To deactivate the
setting, open the Setup dialog by pressing the Setup button, and
click the Default cover page at every transmission check box in the
Cover page tab.
≥You can change your selection in the PANA LINK Main Panel.
Double click the number you set in the Main Panel Display, the fax
number switches into the telephone number. You can also
right-click the entry to select a specific number.
≥If there is transmission data or a document is set in the fax, you can
only use the fax transmission function. If you want to make a phone
call, please delete the transmission data.
≥The viewer can be operated separately, so when the PANA LINK is
closed, it remains open.
I do not know how to move the
PANA LINK Main Panel, because
there is no title bar.
I do not know whether the PANA
LINK Main Panel is active or not.
A Quick tip does not appear when I
hold the mouse pointer over a
button in the PANA LINK Main Panel,
although I have set to display this.
The telephone number set in the
Main Panel Display disappears, and
the display shows “For storing a
phone or fax number.” explanation
of the button and so on.
The PANA LINK Main Panel
disappears.
The PANA LINK Main Panel
disappears just after initializing.
I want to delete all of the telephone
numbers set in the Main Panel
Display.
I cannot recognize the last part of
the entry in the address list of the
Address Book or Communication
log, because that part ended with...
A cover page is sent whenever I
send a fax, though I do not want to
send it.
I attempted to select a telephone
number from the Address Book to
the PANA LINK Main Panel, but I
selected a fax number by mistake.
I cannot use the Dial button, even
though I specified a telephone
number.
When I exit PANA LINK, the Viewer
does not close.

General

(continued)
Problems with PC software