50
Sending Faxes
MENU
START/SET/COPY
/
1Press (MENU).
Display:
2Press (#), then (0)(4).
3Press (START/SET/COPY).
4Press or to select the desired setting.
5Press (START/SET/COPY).
6Press (MENU).
SETUP ITEM [ ]
MODE=ERROR
▼▲
SENDING REPORT
1.SYSTEM SET UP

Sending report for confirmation!

The sending report will provide you with a printed record of the fax transmission result.
One of the following choices is available.
ERROR: The sending report will print out only when fax transmission fails (pre-selected setting).
ON: The sending report will always print out, indicating whether fax transmission is successful or not.
OFF: The sending report will not print.
01 2345678 00'51 SND 00 COMMUNICATION ERROR (43)
Jan. 20 1999 01:19PM
Jan. 20 01:18PM
SENDING REPORT
CODE
NO. USAGE TIME MODE PAGESSTART TIME RESULT
OTHER FACSIMILE
Sample of a sending report
Communication
message (p. 105) Error code
(for service
personnel
use only)
SND: Sent directly.
IQ-FAX: Sent to the fax
server.
Note:
If your fax is not transmitted to the other party’s fax machine when using the FaxSav network, the FaxSav
network will send a Non-Delivery Notice to your unit.