54
Sending Faxes
START/SET/COPY
STOP
JOG DIAL
(DIRECTORY\PROGRAM)
(LOWER)
(BROADCAST)
One-Touch
Dial keys
/
1Press (DIRECTORY\PROGRAM).
Display:
2Press one of the (BROADCAST) keys.
3Press or to select “BROADCAST”.
Example:
4Press (START/SET/COPY).
5Enter the stations.
a: Using the One-Touch Dial:
For stations 1–4, press the preset One-Touch
Dial key which is not used as the
(BROADCAST) key.
For stations 5–11, press the preset One-Touch
Dial key.
For stations 12–22, press (LOWER), then
press the preset One-Touch Dial key.
Example:
b: Using the JOG DIAL directory:
Rotate (JOG\DIAL) until the desired name is
displayed.
Example:
b: Press (START/SET/COPY).
Example:
To enter other stations, repeat this step (up to
20 stations).
DIR=John [002]
John [001]
DIR=Luke [001]
DIR= [000]
BROADCAST 1
▼▲
DIAL MODE
▼▲
OR USE JOG-DIAL
PRESS STATION

Multiple stations!

This feature is useful for sending the same document to selected parties whose telephone numbers are stored
in the One-Touch Dial or JOG DIAL directory. You must program the desired parties into one of the
BROADCAST keys (One-Touch Dial key 1, 2, 3 or 4).
Important:
Before programming, make sure that the desired telephone numbers have been stored in the One-Touch Dial
or JOG DIAL directory.
Each BROADCAST key can be used as a One-Touch Dial key or as a broadcast key. These functions cannot
be used at the same time.

Programming telephone numbers into the BROADCAST

keys

Note:
If you make a mistake while programming,
press (STOP), and make the correction.
Confirm the stored numbers by printing a
broadcast list (p. 123).
6Press (START/SET/COPY) after entering
all of the desired stations.
To program another BROADCAST key,
repeat steps 2 to 6.
7Press (DIRECTORY\PROGRAM) to exit
the program.
OR USE JOG-DIAL
PRESS STATION
REGISTERED